1 3

HEADER,SBC,1 1/2",DOUBLE BARREL SHOTGUN,2 1/2",POLISHED STAINLESS STEEL

HEADER,SBC,1 1/2",DOUBLE BARREL SHOTGUN,2 1/2",POLISHED STAINLESS STEEL

440-2354

$699.99
$699.99
This item requires an additional shipping fee of $20.00 over standard shipping.
View full details
  • BRAND NEW PAIR OF SOUTHWEST SPEED POLISHED STAINLESS STEEL DOUBLE BARREL SHOT GUN HEADERS FOR SMALL BLOCK CHEVY 262-400CI ENGINES.

  • HOT RODS, STREET RODS, RAT RODS & NOSTALGIA RODS ARE HOTTER THAN EVER, AND NOTHING GIVES YOUR ROADSTER THAT AUTHENTIC COMPETITION LOOK LIKE A SET OF SHOT GUN STYLE HEADERS. AGGRESSIVELY STYLED AND MODELED AFTER THE POPULAR ROADSTER HEADERS, THESE STAINLESS STEEL DOUBLE BARREL SHOT GUN STYLE HEADERS ARE THE ULTIMATE WHEN IT COMES TO HEADERS. DESIGNED TO ROUTE THE EXHAUST OVER AND OUTSIDE THE FRAME RAILS AND THEN DOWN THE SIDES OF THE VEHICLE, THESE ARE A GREAT CHOICE FOR MOST ANY ROADSTER WITH A SMALL BLOCK CHEVY ENGINE. ORIGINALLY TAKEN FROM THE EARLY ROADSTER DESIGN THESE EXPOSED SMALL BLOCK CHEVY HEADERS WORK GREAT ON RODS WITHOUT HOOD SIDES, BUT ARE OFTEN USED WITH SIDE SKIRTS TRIMMED UP TO FIT AROUND THE HEADERS ALSO. THESE HEADERS ARE GROUND PARALLEL AND FEATURE .300" FLANGES ON THE CYLINDER HEAD SURFACE WITH 1 5/8" PRIMARY TUBES. THESE STAINLESS STEEL HEADERS ARE SPLIT AND FEATURE 2 CONTOUR CUT 2-1/2" COLLECTORS WITH EXHAUST BAFFLES ON EACH SIDE OF THE ENGINE. THE 2-1/2" CONTOUR CUT COLLECTORS ARE CONNECTED BY A HIDDEN MOUNTING BRACKET ON THE BACK SIDE WITH A 1/2" BOLT HOLE, APPROXIMATELY 15-3/4" FROM THE EXHAUST END, TO ALLOW EXHAUST HANGERS TO BE INSTALLED IF DESIRED. THE 4 EXHAUST BAFFLES DO TONE DOWN THE SOUND SOMEWHAT, BUT YOU STILL HAVE A NOTICEABLE NOISE LEVEL, WITH THESE HEADERS. IF YOU ARE LOOKING FOR QUIET THESE ARE NOT THE HEADERS YOU NEED. SUPPLIED WITH HEADER BOLTS AND GASKETS. FITS ANGLE OR STRAIGHT PLUG HEADS WITH NO SPARK PLUG OR SPARK PLUG WIRE RESTRICTIONS.

  • NOTE: WE STRONGLY SUGGEST YOU REFER TO MEASUREMENT CHART BELOW TO INSURE HEADERS WILL FIT YOUR VEHICLE AND APPLICATION, BEFORE ORDERING.

    • FEATURES:

    • 1-5/8" PRIMARIES TO THE 4 SPLIT 2-1/2" CONTOUR CUT COLLECTORS WITH EXHAUST BAFFLES
    • REMOVABLE EXHAUST BAFFLES
    • GREAT FOR ROADSTERS, HOT RODS, STREET RODS, RAT RODS, & ANY NOSTALGIA ROD
    • MORE PERFORMANCE
    • BETTER MILEAGE
    • NICE CHOICE TO REPLACE CAST IRON EXHAUST MANIFOLDS
    • ENHANCES THE LOOKS OF ANY ROD
    • INCLUDES BOLTS & GASKETS
    • POLISHED STAINLESS STEEL TO RESIST EARLY CORROSION

    APPLICATIONS:

    • FITS ALL SMALL BLOCK CHEVROLET V-8 ENGINES WITH STANDARD EXHAUST PATTERN
    • FITS 265-400 CU. IN. STANDARD, VORTEC, AND D-PORT ZZ-4 HEADS (NOT LT-1)

    POLISHED STAINLESS STEEL WARNING:

    STAINLESS HEADER TUBING WHEN EXPOSED TO EXHAUST TEMPERATURE WILL CAUSE THE FINISH TO CHANGE COLOR WHICH WILL VARY WITH THE EXHAUST TEMPERATURES. PLEASE NOTE THAT THE FINISH OF THE HEADER WHEN THE ENGINE IS STARTED WILL CHANGE TO A LIGHT CHAMPAGNE COLOR TO A DARKER GOLD FINISH AND IN SOME INSTANCE MAY EVEN TURN DARK BLUE OR PURPLE. THIS CAN BE POLISHED OUT WHEN UTILIZING BLUE-AWAY OR SIMI-CHROME POLISH, BUT PLEASE NOTE THAT WHEN THE HEADERS REACH RUNNING TEMPERATURE, THEY MAY CHANGE COLOR AGAIN. NO WARRANTY OR RETURNS ON POLISHED STAINLESS STEEL EXHAUST ITEMS ONCE THEY HAVE BEEN INSTALLED.

    HEADER RETURN POLICY:

    PLEASE REFER TO THE HEADER MEASUREMENT CHART BELOW TO MAKE SURE THE HEADER WILL FIT YOUR VEHICLE AND APPLICATION BEFORE ORDERING. IN THE EVENT YOU ORDER A HEADER THAT WILL NOT FIT YOUR VEHICLE AND APPLICATION, YOU MAY RETURN THEM FOR A REFUND, PROVIDING YOU DONT DAMAGE THE HEADER. WHEN YOU RECEIVE THE HEADER THE FINISH WILL BE PROTECTED AND MUST REMAIN UNSCRATCHED FOR A REFUND. IF YOU BEND OR DIMPLE ANY OF THE TUBES OR SCRATCH THE FINISH, WE WILL NOT BE ABLE TO SELL THE HEADER AND WILL NOT BE ABLE TO PROCESS A REFUND. USE CARE WHEN TRIAL FITTING HEADERS. REPACK THEM WELL TO PREVENT DAMAGE RETURNING THEM TO US. WE WONT PROCESS REFUNDS FOR SCRATCHED, DIMPLED, DENTED, OR BENT HEADERS.