KRC Aluminum Power Steering Pumps with Polished Pulleys
Aluminum power steering pumps with or without bolt-on reservoirs with either 6.0" V-Belt or 4.2" Serpentine Polished Aluminum Pulleys.
Click Picture For More Info |
Flat Adjustable Coil Spring Spacers
Spacers are designed for easy welding to the chassis. Available in two versions: 2 3/4" and 4 3/4". Fast acme threads hold the spacer firmly in place once weight is placed on them, yet can be turned by hand with no weight on them. Perfect for numerous applications, including Sport Mods.
Click Picture For More Info |
<Tubular Lower & Upper Control Arms
Tubular control arms for both 67-69 Camaro and 64-72 GM A Body (including Chevelle, Monte Carlo, Cutlass, GTO, etc.)Sold in pairs with ball joints, bumpers, bushings, & shafts. Specifically designed to plant the tires to the ground in hard cornering allowing the suspension to keep the proper geometry.
Click Pictures For More Info |
Longacre Car Covers with Liner
Covers cut specially to fit race cars. Keep you car cooler & cleaner between races. Heat reflective silver color. Soft liner will not scratch paint. Available for pavement & dirt late model and open wheel modifieds.
Click Picture For More Info |
Longacre Digital Tire Pressure Gauges
Longacre deluxe digital tire pressure gauge with angle chuck. Back lit for easy night viewing. Includes 17" hose and silver carrying case. Two different versions available: 0-25 PSI that reads to .01 and 0-60 PSI that reads to .10.
Click Picture For More Info |
<Longacre Infrared Laser Pyrometers
12 Temperature memory. Can be easily recalled. Reads to 1/10th of a degree. Reads in Fahrenheit & Celsius. Back lights up for night use. Reads up to 1000 degrees Fahrenheit.
Click Picture For More Info |
Van Alstine Deluxe Tire Groovers
Van Alstine's G-1000 tire groover is fast, smooth, and easy to use. It glides over the tire surface. Cuts with less heat degradation to race tire surface. Provides precise, consistent cutting depth with unparalleled control.
Click Picture For More Info |
Hydraulic Throwout Bearing, Master Cylinder, Line Kit, & Bleeder Kit
Bearing & Master cylinder kit for stock clutches. Kit includes: *Bearing with mounting studs, *Remote Bleeder Kit that allows you to bleed the bearing from outside the bellhousing, *36" Steel Braided Line Kit with fittings, and *3/4" Bore Clutch Master Cylinder with line fitting. Also available for racing mini-clutches here.
Click Picture For More Info |
<Clutch Slave, Master Cylinder, & Line Kit
Clutch master cylinder & pulling slave cylinder kit. Kit includes: *Pulling Slave Cylinder with stainless steel push rod & line fitting, *36" Steel Braided Line Kit with fittings, and *3/4" Bore Clutch Master Cylinder with line fitting.
Click Picture For More Info |
Pro Billet Ignition Kit
Full ignition kit includes SBC Pro Billet Distributor, High Output E-Core Coil, and PC6AL-2 Ignition Box. These kits are designed for the enthusiasts that are serious about performance. The coil will produce up to 70% more spark than stock coils with outstanding reliability. Newly designed box is the most powerful ignition of its type available.
Click Picture For More Info |
Small Block Chevy Blocks
Brand new cast iron SBC blocks. Block is finish honed & ready to assemble. Weighs approximately 198 lbs. Click on the picture to see all the specs for these brand new blocks.
Click Picture For More Info |
<Longacre Shifters & Accessories
One piece CNC machined billet aluminum shifter knob. Billet aluminum 3" offset shifter arm. Shifter boot with quick access mounting plate with high temperature liner.
Click Picture For More Info |
2, 3, & 4 Gauge Panels With Tachs
Longacre Accutech gauge panels with tachometers. Available with oil pressure, water temperature, fuel pressure, and oil temperature gauges. 2 5/8" machanical gauges with backlights have CNC machined brass gears and industry standard fittings & connections. 5" Accutech 0-10,000 RPM tach gives fast response with easy instant recall. Warning lights and all senders are included.
Click Picture For More Info |
Complete SBC Front Engine Kit including Alternator Setup
These are the perfect kits to equip the entire front of a Small Block Chevy. Available with or without Denso & Delco Alternators and Mounting Kits. 30 Different kits in stock to match almost any application.
Click Picture For More Info |
<KRC Alternator Mounting Kits
Custom kits are designed to mount Denso or Delco alternators on the passenger side of a SBC and work in conjunction with any of KRC's serpentine pulley kits to run the altenrator off the front of the water pump. Kits include alternator bracket with hardware, alternator pulley, and the belt. Kits are also available with the alternator itself.
Click Picture For More Info |
Pro-Blend Karting Tire Softener
Pro-Blend Inside Tire Treatment is designed to accent the outside tire treatment. It allows you to drop the durometer reading of the tire without prepping aggressively from the outside. Reduces lap times 2-5 tenths. Works on dirt and asphalt.
Click Picture For More Info |
Karting Caliper, Master Cylinder, & Line Kit
Includes: *Wilwood's Go-Kart caliper with two 1" pistons, weighing only 1.2 lbs, with high friction pads, *Wilwood's Master Cylinder with a 1/2" bore, weighing only .55 lbs, *5 Feet of -3 Nylon brake line, and *90 Degree Compression fitting to the caliper. $169.99 gets you all the way from the pedal to the brake rotor. Available for .125", .187", and .500" thick rotors.
Click Picture For More Info |
<Karting Caster/Camber Gauge
Longacre caster/camber gauge with fine threaded karting spindle adapter & hard case. Gauge is very easy to read & extremely accurate. It attaches easily to 5/8"-18 threaded spindles. All critical surfaces are CNC machined for accuracy.
Click Picture For More Info |
Winters Low Friction Bearing Wide 5 Hubs
Lightweight magnesium front & rear hubs reduce rolling resistance by using low friction bearings & oil instead of grease. These hubs are stronger than ever and include drilled studs, aluminum lug nuts, seals, races, bearings, & either drive plate (rear) or hub cap (front).
Click Picture For More Info |
Shock Extensions
1" and 2" long shock extensions available for all Bilstein 46mm Shocks, and any shock with a 1/2" or 9/16 threaded end, including Pro & Carrera.
Click Picture For More Info |
Shock Fill Valves
Allows you to fill & release gas from a shock after the shock is assembled. Fits any shock that has a 1/8" NPT port. Most gas shocks can be tapped 1/8" NPT for this use as well.
Click Picture For More Info |
New Modified Adjustable Upper Control Arms
Allows adjustment of caster and camber with the arm still mounted in place. Fits most popolar modified chassis. Available in kits with or without mounts.
Click Picture For More Info |
High Misalignment Spacers
High misalignment spacers allow rod ends to work at the most adverse angles. Available in steel & aluminum with several bore sizes & for several rod ends.
Click Picture For More Info |
1978-88 GM Metric Pitman Arms
Brand new pitman arms for Chevelle, Monte Carlo, El Camino, Malibu, Cutlass, Regal, GTO, Lemans, and many other GM cars for both Power and Manual steering boxes.
Click Picture For More Info |
New Lightweight Steering Quickners
New, more durable lightweight steering quickners with heat-treated gears and a compact design. Weighs approximately 2.42 lbs. Available in 1.5:1 and 2:1.
Click Picture For More Info |
Lightweight Steering Quickner
Compact, extra lightweight design. Features roller bearings. Weighs approximately 1.78 lbs. 2:1 Ratio.
Click Picture For More Info |
New Steering Reducer Mounts
2 different styles of mount for planetary gear type quick steers, #150-240, #150-2502, #150-255, & 150-2552.
Click Picture For More Info |
Complete Winters Quickchange Rear Ends
Full Quickchange rear ends are available for Modifieds, Late Models, Sprint Car, & Midgets. Aluminum or Magnesium Centers, Steel or Aluminum Tubes, Open Tube or Closed Tube, 3.78", 4.11", or 4.86" ring & pinions, we've got 'em all in stock. We've even got the small, lightweight 8 3/8" ring gear in stock.
Click Picture For More Info |
Hose Ends
Hose ends available for both steel braided hose and push lock hose of all sizes in Straight, 45, 90, 120, 150, & 180 Degree.
Click Picture For More Info |
Magnetic Pipe Plugs
Great for transmission, rear end, engine, etc. drain plugs & inspection plugs.
Click Picture For More Info |
Wilwood Premium Bolt-On Brake Kits
Wilwood Brake Kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. Available for hundreds of different Chevy, Olds, Pontiac, Buick, Ford, Honda, & Mini-Cooper cars. Both front & rear kits available.
Click Picture For More Info |
1965-82 Corvette Calipers & Caliper Kits
Wilwood's D8-4 Corvette Calipers are a great high-performance replacement for the original stock calipers on all 65-82 Corvette's. Forged Billet Aluminum bodies, stainless steel pistons, & competition style high-temperature seals put an end to the rust, bore pittings, & seal failures that plague the oe caliper design.
Click Picture For More Info |
Forged Dynalite Calipers in Black, Red, Blue, & Polished
Lightweight Forged Aluminum Dynalite Caliper series has widespread application over many forms of motorsports. Available in Black, Powder-Coated Red, Powder-Coated Blue, & Polished with different piston sizes for several different rotor thicknesses
Click Picture For More Info |
Low Friction Precision Ball Joints
These precision upper & lower ball joints offer very low resistance while still fully capturing the ball to maintain alignment.
Click Picture For More Info |
Karting Brake Calipers
Go-Kart/Jr. Dragster calipers are available for .125", .187", & .500" thick rotors. Dual 1.00" pistons. Weighing just 1.20 lbs., the caliper comes with high-performance, high-friction brake pads.
Click Picture For More Info |
Karting Master Cylinders
This super lightweight (only .55 lbs.) 1/2" bore aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring.
Click Picture For More Info |
Compact Remote Combination Master Cylinder Kits
Wilwood's compact design allows for more room that is always needed in & around the pedal box. Remote or direct-mounted option for either small or large reservoir. Available with bores from 5/8" to 1 1/8".
Click Picture For More Info |
Sprint Car & Midget Spindles
Midget 9 degree & Sprint Car 10 degree front spindle kits. Forged from 7075-T6 aluminum. Pins are centerless ground, heat-treated 4340 steel. Polished for excellent look.
Click Picture For More Info |
Sprint Car & Midget Hub Kits
Winters aluminum direct mount front hubs offer superior strength. Three different styles of kits available. Kits come complete.
Click Picture For More Info |
Uncoated Aluminum Steering Wheels
Lightweight uncoated aluminum steering wheels in smooth, smooth with bumps, and drilled designs. Dish & flat style available.
Click Picture For More Info |
Manhattan Oil Products
Scented Alcohol Lube & Fuel Fragrance available in a wide range of scents including Cherry, Grape, Strawberry, & Bubble Gum.
Click Picture For More Info |
Custom Rubber GM Trailing Arm Bushings
Bushings replace the upper trailing arm mount bushings & lower trailing arm bushings in many Chevy, Buick, Oldsmobile, & Pontiac cars from 1978-88. Changeable inner bushing enables great adjustment to allow for rear steer.
Click Picture For More Info |
U-Design-It Floaters
Southwest Speed now enables you to design & weld your own floater. This allows you to position all the mounts where they work best on your car. Sold in pieces.
Click Picture For More Info |
Bearing Floater Collars from 1 1/2" to 5" Wide
U-Design-It Floater Collars with roller bearings are now available in widths of 1 1/2", 3", 4", & 5". Roller bearings allow smoother movement with less bind.
Click Picture For More Info |
GM Metric Brake Floaters with Bearings
GM Metric brake floaters with roller bearings, which allow smoother movement with less bind. Left & right are available with 2 sets of either 5/8" or 3/4" through holes.
Click Picture For More Info |
1" Coarse Weight Jack Kit with Bolt-On Plates
With these kits, the weight jack bolt bolts directly to the plate using the retainer bolt that is included. Available with either standard steel, lightweight steel, or aluminum plates to fit either 5" or 5 1/2" o.d. springs.
Click Picture For More Info |
Wilwood Tandem Master Cylinders
Several different styles of Dual Outlet (Tandem) Master Cylinders Available.
Click Picture For More Info |
Girling-Type Master Cylinders, 5/8" & 3/4"
Lightweight aluminum Girling-type master cylinders fit all popular racing pedals including Southwest Speed, Wilwood, & Howe. Available with 5/8" & 3/4" bores.
Click Picture For More Info |
Needle Bearing Throttle Pedals
Southwest Speed Needle Bearing Gas Pedals are the smoothest operating pedals on the market. Splined pivot shaft supported by the dual needle bearings. Knurled aluminum roller foot pedals. Fully indexable pedal & throttle arm allow adjustment for your specific application. Front firewall mount, straight & angled side firewall mounts available.
Click Picture For More Info |
Southwest Speed Dual Reverse Mount Swing Pedal Combos
Brake & clutch pedal combos. Both short & long designs available. Reverse mount master cylinders. Features balance bar for adjustable brake bias.
Click Picture For More Info |
Southwest Speed Master Cylinders
Aluminum master cylinders. Available in 3/4", 7/8", & 1" bore sizes.
Click Picture For More Info |
Denso & Delco Alternators
Several types of alternators available. Denso alternators are available in true one wire & a jumper wire.
Click Picture For More Info |
Racing Alternator Mounting Kits
Racing alternator kits cover all forms of circle track racing & give the racer some choices for mounting styles. All kits come with a true one wire alternator, alternator pulley, alternator drive pulley for the front of the water pump, proper mounting bracket, drive belt, & necessary hardware.
Click Picture For More Info |
Drag Racing Alternator Kits
These easy-to-install kits will solve low voltage problems. Snug mount & low mount kits are available for both SBC & BBC.
Click Picture For More Info |
Full Containment Seats
 
3 Different styles of full containment seats available, include Kirkey 68000 series which is the most economical full containment seat on the market and Kirkey 63000 reinforced adjustment full containment.
Click Picture For More Info |
Upper A-Arm Bushings in Steel, Nitrile, & Rubber
3 Types of bushings are available to fit almost every upper control arm application. Charts are available to determine which bushings you will need for Chevy, Buick, Oldsmobile, Pontiac, & Ford arms.
Click Picture For More Info |
Lower A-Arm Bushings in Steel, Nitrile, & Rubber
3 Types of bushings are available to fit almost every lower control arm application. Charts are available to determine which bushings you will need for Chevy, Buick, Oldsmobile, Pontiac, & Ford arms.
Click Picture For More Info |
Southwest Speed Quick Change Gear Cover
Lightweight aluminum construction. Cover includes inspection covers & bearings.
Click Picture For More Info |
Stock Lower Control Arms with Oval or Round Rear Bushing
Arms fit 1964-72 Chevelle, Monte Carlo, El Camino, Malibu, 1964-72 Buick Century, Luxus, Regal, Skylark, & Special, 1964-72 Pontiac Lemans, Grand Am, Grand Lemans, GTO, Tempest, & T37, 1969-72 Pontiac Grand Prix, 1966-72 Oldsmobile Cutlass, F85, Vista Cruiser, 4-4-2, & Calais. Available with either an oval rear bushing hole or a round rear bushing hole.
Click Picture For More Info |
SBC Complete Front Engine V-Belt Kits
The perfect kits to equip the entire front of a SBC with v-belt pulleys. Head mount & block mount are available in 21% reduction and in 1 to 1.
Click Picture For More Info |
SBC Complete Front Engine Serpentine Kits
The perfect kits to equip the entire front of a SBC with serpentine pulleys. Head mount & block mount are available in 30% reduction, 15% reduction, & 1 to 1.
Click Picture For More Info |
Chevy Crate Motor Complete Front Engine Serpentine Kits
The perfect kits to equip the entire front of a Chevy Crate Motor with serpentine pulleys. Also available with alternator bracket, pulley, & belt for either a Denso or a Delco alternator.
Click Picture For More Info |
KRC Serpentine Pulley Kits
Serpentine water pump & crank pulley kits are available for SBC's, Dodge's, & Ford's. Each is available with 30% reduction, 15% reduction, or 1 to 1.
Click Picture For More Info |
SBC Power Steering Pump Kits with Cast Iron Pumps
 
Kits are available with either v-belt or serpentine pulleys, head or block mounting brackets, and remote or bolt-on tanks.
Click Picture For More Info |
SBC Power Steering Pump Kits with Aluminum Pumps
 
Kits are available with either v-belt or serpentine pulleys, head or block mounting brackets, and remote or bolt-on tanks.
Click Picture For More Info |
Ford Power Steering Pump Kits
 
Cast Iron and Aluminum Pump Kits are available with either v-belt or serpentine pulleys, Ford 260-302 or Ford 351-400 mounting brackets, and remote or bolt-on tanks.
Click Picture For More Info |
Driveshaft Yokes in Many Different Splines, Lengths, & U-Joint Series
Available 27, 28, 31, & 32 spline and 1310, 1330, 1350, & 3R series. We can substitute any of our yokes in with one of our driveshafts to fit your specific application.
Click Picture For More Info |
Driveshaft U-Joints in Many Different Series
1310, 1330, 1330SP, 1350, 3R / S44, & 7260 series u-joints available. Easy-to-read chart makes it simply to figure out which u-joint need for your application.
Click Picture For More Info |
Threaded Adjustable Steel Pinion Bracket
9" Ford steel, double sided pinion bracket. Threaded design on both sides give 2 1/2" of up & down adjustment of the panhard bar without taking anything off of the car. 3/4" Powder coated steel construction.
Click Picture For More Info |
Steel Clamp Brackets
Lightweight steel construction. Designed to fit round tubing from 1 1/4" to 1 3/4". Features hex head bolts & a 1/2"-13 mounting hole.
Click Picture For More Info |
Camaro A-Arms For Both Stock & Racing Ball Joints
Brand new Camaro Upper A-Arms in two different versions to fit the Small Stock Bolt-In Ball Joint and the Large Racing Bolt-In Ball Joint. Available in 1/4" increments from 8" to 9 1/2".
Click Picture For More Info |
Power Steering Combos
All combos include: Power Steering Pump (aluminum or steel), aluminum pulley (v-belt or serpentine), mounting bracket (SBC, SBF, BBF, & more available), & lightweight aluminum tank (remote or bolt-on).
Click Picture For More Info |
Falcon Transmissions & Parts
REPLACEMENT PARTS
We carry Falcon Transmissions and all the replacement parts.
Click Picture For More Info |
Roller Bearing Coilover Eliminators
Lightweight steel construction with roller bearings. Dual seal design with internal stop. Long version accepts springs from 7" to 16" tall.
Click Picture For More Info |
Southwest Speed T-Shirts
High-quality, white cotton t-shirts are available in Small, Medium, Large, XL, 2X, & 3X.
Click Picture For More Info |
